MSI-3460 Challenger 3
10
Visit our website
4.2 Set Function Key
The MSI-3460 has one user definable key
on the front panel that can be programmed to one of several functions.
To set the function key use the following steps:
1. Press
and
simultaneously
.
displays.
2. Press
. The current user key function displays.
3. Press
to scroll through the available functions.
4. Press
when the desired function is displayed.
displays.
5. Press
.
displays briefly and exits
Setup
mode.
4.2.1 Test
The
TEST
function will automatically scroll through the following:
• Lights all LEDs at once
• Displays
followed by the software version number
• Displays
followed by the battery voltage
• Displays
followed by the display counting from 00000–99999
• Displays
followed by the C-CAL value
Other internal tests are performed and if any test fails, an error code displays. See
for the
troubleshooting guide.
To run a
TEST
:
1. Program the
to
).
2. Press
to start the test. It runs through the complete test and returns to
Weigh
mode.
Single Step Through Test Procedure
1. Press
within two seconds of test start to enable a single step mode.
2. Press
to scroll through the available test functions.
3. Press
to start or display the individual tests.
4. Press
to exit individual tests.
5. Press
to exit from the test function.
USER
F
POWER
USER
F
USER
F
USER
F
TARE
ZERO
USER
F
USER
F
USER
F
USER
F
TARE
ZERO
ZERO
Содержание Challenger 3 MSI-3460
Страница 1: ...MSI 3460 Challenger 3 Technical Manual PN 152161 Rev F June 24 2021...
Страница 44: ...MSI 3460 Challenger 3 40 Visit our website www RiceLake com...
Страница 45: ......
