BenchPro Postal BP-P Scale
12
Visit our website
16. Press
to scroll to the alternate calibrate weight value, if performing a calibration using certified weights.
17. Press
to accept.
displays.
18. Place the calibration weight on the scale and wait for the value to stabilize.
19. Press
to accept. The calibration data is saved and the scale returns to the weigh mode.
The weight value displayed must match the value of the calibration weight used. If not, perform the calibration a second time
and follow each step carefully. If
displays, there is a calibration error. Ensure the correct calibration weight value was
selected in comparison to the actual calibration weight used. See
for more information on
troubleshooting.
5.2 Linear Calibration
Only perform a linear calibration function if instructed by Rice lake Weighing Systems and an authorized scale
technician.
The BenchPro includes an optional linear calibration feature. This is an additional feature to perform after a span calibration has
been completed at
maximum capacity
and linear calibration is performed with two lower calibration weight values.
1. See
displays.
2. Press
until
displays.
3. Press
to accept.
or
displays.
4. Press
until
displays.
5. Press
to accept.
displays.
6. Press
until
displays.
7. Press
to enter
parameter.
8. To choose the appropriate scale capacity, see
9. Press
to scroll to chosen capacity.
10. Press
to accept.
displays.
11. Press
until
displays.
12. Press
to enter
parameter.
displays.
13. With no weight on the platter, press
to enter
parameter. The raw A/D counts for zero displays.
14. Press
to calibrate zero.
displays.
15. Press
until
displays.
16. Press
to enter
parameter.
briefly displays, followed by the
weight value.
IMPORTANT
Содержание BenchPro BP-P
Страница 1: ...BenchPro BP P Postal Bench Scale Operation Manual PN 180557 Rev E July 22 2020...
Страница 31: ......
