Configuration
© Rice Lake Weighing Systems
●
All Rights Reserved
7
4.2 Service Menu
The service menu provides the configuration settings for all of the parameters and access to perform calibration.
4.2.1 Access Service Menu
1. Press
to power on the unit.
2. Lift the weigh platter from the scale.
displays.
3. Remove the 8 mm hex screw and open the PCB compartment.
Figure 4-1. BP-P Top View with Weigh Platter Removed
4. Press the Setup Switch.
5. Configure all service parameters (
).
6. Press
once all parameters have been set
displays.
7. Press
to exit and save changes.
8. Set the PCB compartment door back in place and reinstall the hex screw to secure it.
9. Place the weigh platter back onto the scale.
Hex Screw
Setup Switch
Содержание BenchPro BP-P
Страница 1: ...BenchPro BP P Postal Bench Scale Operation Manual PN 180557 Rev E July 22 2020...
Страница 31: ......
