Page
20
/
32
•
Remove the oil tank cap (11) and dipstick, fill with
recommened oil (0.3 litre) slowly until reaching the
upper limit. Do not overfill.
•
Replace the oil tank cap.
•
WARNING!
The drained waste oil shall be collected
and disposed of properly according to the local
environmental regulation.
Spark plug check and replacement
•
Spark plug F7RTC or equivalent is recommended.
•
Make sure the engine is completely stopped and cooled
down.
•
Remove the spark plug with a suitable spark plug
wrench.
•
Visually inspect the spark plug for any sign of worn or
damage. If yes, replace with a new one.
•
The desired air gap is between 0,70 mm to 0,80 mm.
•
Install and tighten the spark plug (torque: 25-30 Nm).
Fig. 10
Air filter cleaning
•
Remove the air filter cover (6), then carefully
remove the filter element.
•
Clean the air filter chamber with a damp cloth.
•
Clean the paper element with compressed air.
•
Restore the filter element and replace the air filter
cover.
•
WARNING!
Do not clean with gasoline and any
flamable solvents.
Fig. 11
6.2- Storage
•
Clean the product before storage.
•
Perform maintenance operations before storage.
•
For prolonged storage, drain the oil and gasoline from the tanks, and lubricate the moving
parts.
•
Remove the spark plug.
•
Check and ensure the engine power switch (7) is set at “OFF” position.
•
Product must be stored in a dry, clean environment protected from dust. Always lock up
product and keep out of reach of children.
•
Keep the product, instruction manual and accessories in the original packaging.
•
Position the machine so that the engine is level.
•
The engie must be cooled down before storage.
•
Cover engine well to prevent dust.
6.3- Disposal
Debris and remnants
•
Do not throw with household rubbish or in the environment. Dispose of any debris and
remnants in rubbish collection centres or seek advice from your local municipality.
Fuel and oil
•
Before disposing of the product, drain the fuel and oil. Do not dispose of oil and fuel with
