Page
37
/
69
Insert the support plate (1) hooks to
the base of the left (5) and right (7)
protective covers and fix with two
M8x16 Hexagon socket screws (13),
two flat washers (10) and two locknuts
(12).
Fix the side arms (2) on both sides of the
support plate (1) with two M8x16
Hexagon socket screws (13), two flat
washers (10) and two locknuts (12).
Fix the side arms (2) to the stand legs
with two M8x55 Hexagon bolt (14), two
flat washers (10) and two locknuts (12).
Use the square lugs (8) to fix the
protective front cover (3) to the left (5)
and right (7) protective covers
Use the square lugs (8) to fix the
protective back cover (4) to the right (7)
protective cover.
Note: If insertion by hand results
difficult, you may use a wooden or
rubber hammer to knock them into
place.
The machine is now fully
assembled.
IMPORTANT:
DO NOT USE THE LOG SPLITTER
WITHOUT THE PROTECTIVE
COVER FULLY ASSEMBLED!
