Page
35
/
69
4.2- Assembly
Assembly of the support legs to the log splitter
Place the log splitter on flat and level ground, then bolt the support legs to the log splitter (see fig.
below).
1- Connect the front stand tubes (B) to the bent connection tubes using bolts, washers and nuts.
2- Connect horizontal shaft (C) between the two front stand tubes (B) with screws and washers
3- Insert the front stand tubes (B) into the horizontal leg (D) and fix with bolts.
4- Connect the back-stand tubes (A) to the bent connection tubes using bolts, washers and nuts.
5- Connect horizontal shaft (C) between the two back stand tubes (A) with screws and washers.
6- Insert the wheel shaft (E) into the left and right back stand tubes (A).
7- Insert wheels (F) on the shaft extremity (E) and lock with circlips on both sides of the wheel.
8- Last, fit the wheel cover (G)
