Rhotheta RT-500-M, Руководство пользователя

Страница: 93 / 168

RT-500-M
RHOTHETA Page 93 of 168 User Manual
Figure 101. Dark mode activation warning
If this variant of “Dark Mode” is activated, the “STNBY Mode Settings” line on the “Display” page will
show the current settings of the “Display Brightness” and “Key Illumination” (s. Figure 102).
The result on the “Display” page after pressing “OK” will be as shown in the Figure 102.
Figure 102. Manual deactivation of the standby mode is turned on
If the DCU’s illumination is completely turned off for the “Dark Mode”,
ƒ “Display Brightness” and “Key Illumination” are set to “Off” and
ƒ
“STNBY Deactivation is set to “User”,
leaving the “Standby Mode Settings” dialog by pressing “OK” will generate a “Dark Mode” warning (s.
Figure 103) in order to indicate that all the device illumination is going to be disabled and only manual
deactivation of the standby mode will be possible.
Figure 103. Activation of the dark mode with disabled illumination
If this warning is accepted by pressing “OK”, the activation of the “Dark Mode” is also indicated on the
“Display” page as follows (s. Figure 104).