Rhotheta RT-500-M, Руководство пользователя

Страница: 36 / 168

RT-500-M
RHOTHETA Page 36 of 168 User Manual
The number keys can be used for inputting the frequency name
(s. also , “Edit Name”) since the names of frequencies may
contain numbers and characters.
“Save”
Pressing the “down” arrow until the green frame reaches the
“Save” button and confirming with “OK” will save all previously
made modifications within the “memory” dialog (editing
frequencies, names etc.). Once done, the dialog can be closed
by pressing “ESC”, all changes will remain saved.
Using the “ESC” button without previously confirming the
changes with “Save” will close the memory dialog without saving
the changes.
Table 8. Memory Dialog. List of elements
Edit Name Sub-Dialog
This dialog is opened from the top level of the “Memory” dialog by using the corresponding hotkey and
allows editing the name for the marked frequency.
This dialog cannot be closed with the button “OK” because that button is used to confirm each
individual character for the text input. The characters are selected by navigating on the virtual keypad
using the arrow keys (s. position 3, Figure 22). The dialog is closed by confirming with the button “End
of User Input” on the virtual keyboard.
Figure 22. Editing the frequency name
If the frequency name contains numbers, they can be entered using the number keys on the keypad
(s. position 5, Figure 22) since the virtual keyboard itself does not contain number keys.
Using the “DEL” button (s. position 4, Figure 22) the whole input will be deleted.