RHINOCEROS XN08 Скачать руководство пользователя страница 3

Страница: 3 / 52

Chapter I Usage Features and Performance Parameters of Rhinoceros 0.8T

Excavators

Section I Usage and features

Rhinoceros 0.8T Excavators

are provided with excavating, crushing, ditch cleaning, drilling and bulldozing,

with their attachments quick hitched and thus its utilization up greatly. In addition, they are easy to operate and

transport and flexible to work at narrow site.

Rhinoceros 0.8T Excavators, hydraulic type with single bucket

This type of excavators are mainly applied to: farming, landscaping, ditching and fertilization in garden, vegetable

greenhouse, agricultural transformation, indoor demolition, small earthwork, civil engineering, road recovery,

basement and indoor construction, concrete breaking, burying of cable, laying of water supply line, garden

cultivation, desilting and others.
The excavator are equipped with Changchai diesel engines, domestic main pumps and rotary motors, Eton (USA)

traveling motor, featuring comprehensive guarantee, durability and flexibility.
Excavators are able to equipped with multiple work equipments, such as quick hitch, log grab, ripper, leveling

bucket, auger and narrow bucket, as well as optional roof, radiator and others, so as to meet your needing.

Содержание XN08





















































Результаты поиска

Содержание XN08

Отзывы:

Бренды по названию

Популярные бренды

RHINOCEROS XN08, Руководство по эксплуатации и техническому обслуживанию

Результаты поиска

Содержание XN08

Отзывы:

Бренды по названию

Популярные бренды