29
I. Inspection of hydraulic oil level --- each day
Important:
With no hydraulic oil, never start up engine!
1. Park machine on the flat ground.
2. Completely retract the arm cylinder and extend out the bucket cylinder, so as to locate the machine.
3. Lower the bucket onto the ground.
5. Idle engine at low speed for 5min.
6. Shut down engine Unplug the ignition key.
8. Check if the oil level in hydraulic oil tank between the markers on dipstick, and add it if needed. . .
Caution:
Hydraulic oil tank has pressure, and therefore slowly open its cap to release pressure before adding of
oil. .
9. Open the hydraulic oil tank to add oil and then
check the oil level again. .
10. Put the cap back on hydraulic oil tank
Содержание XN08
