RHINO RX5 Скачать руководство пользователя | Manualshive

Страница: 12 / 156

background image

SAFETY

RX5-RX6 02/10

Safety Section 1-6

© 2010 Alamo Group Inc.

SAFETY

Do not operate Mower if excessive vibration exists.    Shut down PTO and the Tractor
engine.    Inspect the Mower to determine the source of the vibration.   If Mower blades are
missing or damaged replace them immediately.   Do not operate the mower until the
blades have been replaced and the Mower operates smoothly.   Operating the Mower with
excessive vibration can result in component failure and broken objects to be thrown
outward at very high velocities.  To reduce the possibility of property damage, serious injury,
or even death, never allow the Mower to be operated with blades missing.

(SFL-4)

Operate this Equipment only with a Tractor equipped with an approved roll-
over-protective system (ROPS). Always wear seat belts. Serious injury or
even death could result from falling off the tractor--particularly during a turnover
when the operator could be pinned under the ROPS.

(SG-7)

BEFORE leaving the tractor seat lower the implement, set the parking
brake and/or set the tractor transmission in parking gear, disengage the
PTO, stop the engine, remove the key, and wait for all moving parts to
stop. Place the tractor shift lever into a low range or parking gear to
prevent the tractor from rolling. Never dismount a Tractor that is moving
or while the engine is running. Operate the Tractor controls from the
tractor seat only.

(SG-9)

Never allow children or other persons to ride on the Tractor or Implement.
Falling off can result in serious injury or death.

(SG-10)

Never allow children to operate, ride on, or come close to the Tractor or
Implement. Usually, 16-17 year-old children who are mature and
responsible can operate the implement with adult supervision, if they
have read and understand the Operator’s Manuals, been trained in
proper operation of the tractor and Implement, and are physically large
enough to reach and operate the controls easily.

(SG-11)

Do not mount or dismount the Tractor while the tractor is moving. Mount
the Tractor only when the Tractor and all moving parts are completely
stopped.

(SG-12)

«
...
10
11
12
13
14
...
»

Содержание RX5





























































































































































Отзывы:

Нет отзывов

Похожие инструкции для RX5

Бренд: Grasshopper Страницы: 56

Бренд: Parkside Страницы: 50

Бренд: Trueshopping Страницы: 107

Бренд: Neuton Страницы: 56

Бренд: MTD Страницы: 30

APACHE 1275 ZSL

Бренд: Garland Страницы: 184

Бренд: Husqvarna Страницы: 16

Бренд: Husqvarna Страницы: 16

Бренд: Husqvarna Страницы: 16

Бренд: Husqvarna Страницы: 32

WH4817EFQ/968999252

Бренд: Husqvarna Страницы: 28

Бренд: Husqvarna Страницы: 44

Бренд: Husqvarna Страницы: 40

WH3615/966947001

Бренд: Husqvarna Страницы: 32

WEED EATER WE261

Бренд: Husqvarna Страницы: 25

Бренд: Husqvarna Страницы: 49

Бренд: Husqvarna Страницы: 44

Бренд: Husqvarna Страницы: 52

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды