RHINO RX5 Скачать руководство пользователя

Страница: 39 / 156

Prepare For Safe Operation

Check The Mower And Tractor Equipment

Before beginning your work day inspect the machine
and have all systems in good operational condition.

WARNING!

Prevent possible crushing injury from falling

equipment. Hydraulic system or part failure could cause
unsupported equipment to fall.

Do not go under raised

equipment unless it is properly supported according
to the operator’s manual.

— Perform daily and periodic service procedures as

instructed by the equipment manufacturer.

— Check for loose, broken, missing or damaged tractor

and mower parts. Repair or replace these parts.

— Check for proper tractor and mower attachments.
— Check for proper tractor and mower PTO rpm rating

match.

— Check mower blade(s) condition. Replace severely

worn, bent, gouged or nicked blades including the
blade bolts and fasteners. Never straighten or weld
on blades.

— Ensure thrown object shielding is properly installed

and in good condition. Repair or replace if damaged
or missing.

Read Manual –

Block Up or

Securely Support

Mower

Maintain

Machine

Walk-Around

Inspection

Prepare For Safe Operation

— Check that all guards and shields are in place and

that all equipment is in good operating condition. This
includes PTO driveline, gearbox and implement guards
and shields that are used for operator protection.

— Check for properly latched driveline yoke-end locking

devices.

— Check for damaged or leaky tractor and mower

hydraulic systems. Repair or adjust as needed.

WARNING!

Hydraulic fl uid under pressure can penetrate

the skin or eyes and cause serious injury, blindness or
death. Fluid leaks under pressure may not be visible.

Use a piece of cardboard or wood to ﬁ nd leaks, not
your hand. Wear eye protection.

If fl uid is injected

into the skin, it must be removed within a few hours by
medical personnel familiar with this type of injury.

— Keep the operator platform surface clean and free of

grease, oil, dirt, snow or ice. Steps and handholds
must be clean and functional.

— Ensure work lights are kept clean (if equipped). Check

that all lights work properly.

— Ensure the slow moving vehicle (SMV) sign, refl ectors

and warning lights are in good condition and can be
clearly seen.

— Ensure all tools or loose objects are removed or

securely fastened while operating the machine.

— Check all safety signs for clarity. Replace damaged

signs.

Check for

Leaks and Inspect

Hoses

Check for Missing/

Damaged Guards

and Shields

Put Away

Tools

Содержание RX5





























































































































































Результаты поиска

Содержание RX5

Отзывы:

Похожие инструкции для RX5

Бренды по названию

Популярные бренды

RHINO RX5, Руководство оператора

Результаты поиска

Содержание RX5

Отзывы:

Похожие инструкции для RX5

Бренды по названию

Популярные бренды