RHINO RX5 Скачать руководство пользователя | Manualshive

Страница: 101 / 156

background image

OPERATION

RX5-RX6 02/10

Operation Section 4-7

© 2010 Alamo Group Inc.

OPERA

T

ION

DO NOT

use a PTO adapter to attach a non-matching Implement driveline to a Tractor

PTO. Use of an adapter can double the operating speed of the Implement resulting in
excessive vibration, thrown objects, and blade and implement failure. Adapter use will also
change the working length of the driveline exposing unshielded driveline areas. Serious
bodily injury and/or equipment failure can result from using a PTO adapter. Consult an
authorized dealer for assistance if the Implement driveline does not match the Tractor PTO.

(S3PT-14)

Never operate the Tractor and Mower if the Implement input driveline is directly connected
to the Tractor transmission. Tractor braking distances can be substantially increased by
the momentum of the rotating Mower blades driving the Tractor transmission even though
the Tractor clutch has been disengaged. Install an over running clutch between the Tractor
PTO and the Mower driveline to prevent this potentially dangerous situation.

(S3PT-16)

4. GETTING ON AND OFF THE TRACTOR

Before getting onto the tractor, the operator must read and completely understand the implement and tractor
operator manuals. If any part of either manual is not completely understood, consult an authorized dealer for
a complete explanation.

OPS-U- 0007

Do not mount or dismount the Tractor while the tractor is moving. Mount
the Tractor only when the Tractor and all moving parts are completely
stopped.

(SG-12)

4.1 Boarding the Tractor

Use both hands and equipped handrails and steps for support when boarding the tractor. Never use control
levers for support when mounting the tractor. Seat yourself in the operator’s seat and secure the seat belt
around you.

Never allow passengers to ride on the tractor or attached equipment. Riders can easily fall off and be
seriously injured or killed from falling off and being ran over. It is the operator’s responsibility to forbid all extra
riders at all times.

OPS-U- 0008

Never allow children to operate, ride on, or come close to the Tractor or
Implement. Usually, 16-17 year-old children who are mature and
responsible can operate the implement with adult supervision, if they
have read and understand the Operator’s Manuals, been trained in
proper operation of the tractor and Implement, and are physically large
enough to reach and operate the controls easily.

(SG-11)

«
...
99
100
101
102
103
...
»

Содержание RX5





























































































































































Отзывы:

Нет отзывов

Похожие инструкции для RX5

Бренд: Worx Страницы: 16

Бренд: Neuton Страницы: 28

Commercial Front Cut Rider YHRK20

Бренд: Yazoo Страницы: 83

Бренд: Textron Страницы: 26

LazerCut LCS405

Бренд: SANLI Страницы: 19

Бренд: Gardol Страницы: 30

Бренд: Smithco Страницы: 114

Бренд: Jacobsen Страницы: 152

GRASSLAND MOWER 53 CM

Бренд: Stiga Страницы: 4

Бренд: Baroness Страницы: 6

Бренд: Makita Страницы: 24

Бренд: Makita Страницы: 140

Бренд: Powersmart Страницы: 20

Бренд: MTD Страницы: 7

Cub Cadet 19B70004100

Бренд: MTD Страницы: 20

Бренд: MTD Страницы: 3

Бренд: MTD Страницы: 16

Бренд: MTD Страницы: 2

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды