manualshive.com logo in svg

RHINO RX5, Руководство оператора

Операторская инструкция RHINO RX5 доступна для бесплатного скачивания с нашего сайта. Этот мануал поможет вам правильно использовать продукт и получить от него максимум пользы. Скачайте инструкцию с manualshive.com прямо сейчас!

Поделиться
Скачать
background image

26

Perform Maintenance Safely

Mower Blade Maintenance (continued)

— 

How are mower blades made?

 

Mower blades are made of high strength alloy spring 
steel. They are hot-forged and shaped to meet the 
manufacturer’s individual specifi cations, then heat 
treated and tempered to a high strength, ductile state 
to reduce the possibility of breaking while mowing. 
Blades are tested to ensure they meet strength, 
hardness, and ductility standards. If a blade fails to 
meet any of these specifi cations, it will not be used 
on the mower.

— 

What happens when a mower blade bends?

 

It takes a great amount of impact force to bend 
the blade. This impact force often results in the 
blades being gouged or chipped. After a blade 
is damaged by a gouge or chip a blade failure is 
much more likely to occur. When a blade is severely 
bent, a microscopic crack may be created in the 
blade. Straightening the blade does not remove or 
repair this crack, but may cause additional cracks. 
Additional stresses during mowing operations can 
result in an unexpected blade failure. 

— 

Avoid bending blades.

 Help prevent mower blades 

from bending or cracking by avoiding contact with 
solid objects. Mower blades are intended to cut 
grass, shrubs, woody vegetation, and small trees and 
limbs. They are not intended to contact solid objects 
such as rocks, concrete, or steel posts. Inspect the 
area prior to mowing. Remove or clearly mark any 
solid objects and mow around them.

— 

Replace damaged blades!

 Inspect the mower blade(s) 

daily or after hitting any solid object. If a mower blade 
becomes damaged (bent, gouged, cracked) or worn 
more than 25 percent of the original size, it should 
be removed and replaced with a new blade. Always 
use the original manufacturer’s blades. Aftermarket 
brand blades may not meet the mower manufacturer’s 
strength, hardness and ductility requirements.

— 

Do not take chances mowing with damaged or 
bent blades.

 Using a damaged or straightened 

mower blade can result in the blade breaking and 
being thrown into the operator or a bystander causing 
death or serious injury. The price of a new blade is 
small compared to the potential for the serious injury 
that could result from a bent or broken blade being 
thrown from the mower.

Final Word To The User

You have just fi nished reading the AEM Industrial and 
Agricultural Mower Manual. It is impossible for this 
manual to cover every safety situation that you may 
encounter on a daily basis. Your knowledge of these 
safety precautions and your application to the 

basic rules of safety will help to build good judgment 
in all situations. Our objective is to help you develop, 
establish and maintain good safety habits to make 
operating an Industrial and Agricultural Mower easier 
and safer for you.

This manual is another in a series on the safe operation of machinery published by AEM.

Many pictorials in this safety manual can be found and downloaded at http://pictorials.aem.org.

For additional publications visit our website at www.safetymaterials.org.

ASSOCIATION OF
EQUIPMENT MANUFACTURERS

e-mail [email protected]
www.aem.org

Содержание RX5





























































































































































Отзывы:

Нет отзывов

Похожие инструкции для RX5

McCulloch 532 42 27-27 Rev. 2 Operator'S Manual preview
532 42 27-27 Rev. 2
Бренд: McCulloch Страницы: 28
Scag Power Equipment SW-13BV Technical Manual preview
SW-13BV
Бренд: Scag Power Equipment Страницы: 24
Stihl RM 545 Instruction Manual preview
RM 545
Бренд: Stihl Страницы: 392
Ransomes HR380 Manual preview
HR380
Бренд: Ransomes Страницы: 128
AS MOTOR AS 915 ENDURO Operating Instructions Manual preview
AS 915 ENDURO
Бренд: AS MOTOR Страницы: 36
Rockwell RG8767 Safety And Operating Manual preview
RG8767
Бренд: Rockwell Страницы: 16
MTD 120-255A Owner'S Manual preview
120-255A
Бренд: MTD Страницы: 19
Exmark ULTRAVAC BAGGER Setup Instructions preview
ULTRAVAC BAGGER
Бренд: Exmark Страницы: 19
Alamo JD-5105 Assembly Manual preview
JD-5105
Бренд: Alamo Страницы: 104
MTD 131-525A Owner'S Manual preview
131-525A
Бренд: MTD Страницы: 47
Jacobsen Zero Turn Rotary Mower Safety, Operation & Maintenance Manual preview
Zero Turn Rotary Mower
Бренд: Jacobsen Страницы: 62
Electrolux Flymo Contour User Manual preview
Flymo Contour
Бренд: Electrolux Страницы: 13
Electrolux 96012001101 Parts List preview
96012001101
Бренд: Electrolux Страницы: 16
Electrolux 6Speed - 96012008900 42" 16.5HP Riding Mower Illustrated Parts List preview
6Speed - 96012008900 42" 16.5HP Riding Mower
Бренд: Electrolux Страницы: 36
Electrolux 4546P BIO Operator'S Manual preview
4546P BIO
Бренд: Electrolux Страницы: 8
Electrolux 40 cm cordless Manual preview
40 cm cordless
Бренд: Electrolux Страницы: 10
Electrolux BBO001 Instruction Manual preview
BBO001
Бренд: Electrolux Страницы: 40
Electrolux Bestgreen BM135H107 Instruction Manual preview
Bestgreen BM135H107
Бренд: Electrolux Страницы: 52

Бренды по названию

Популярные бренды

Загрузить еще бренды