5
Door Lock on Ignition (Programmable)
If you have central locking connected, when this feature is on the doors will lock when the ignition is turned to on, and
unlock when the ignition is turned to off. This is to prevent anyone but occupants in the vehicle from being able to open
the doors.
Pre-Alert (2 Stage) Car Body Impact Warning with ETS™
This special feature provides a two-stage impact sensing system. It gives the security conscious owner a sensitive car
body impact sensor that will give a potential thief prior warning that the vehicle is protected by this most formidable alarm
system. On detection of a low level impact i.e. from a tyre kick, the siren will simply beep for a few seconds to warn away
the would-be thief. If the vehicle is attacked any further, the system will move into full siren mode. The unique ETS™
Environment Tuned Sensor is able to distinguish between environmental shocks caused by aircraft, trucks, or extreme
weather conditions, and the impact caused by any thief attempting to break in or other heavy impacts. Furthermore the
system features the unique Rhino "Auto Adjust” process, where during the 45 sec. arming delay, the alarm samples the
background noise where the vehicle is parked, and will if necessary automatically reduce the sensitivity of the impact
sensor to an appropriate level. This process allows a trouble free sensitivity that ordinary alarms simply cannot provide.
The sensitivity level reference point can be adjusted to suit your particular needs. Please refer to the programming
section contained later in this manual.
Auto Bypass
Auto bypass is designed to reduce false alarms caused by faulty switches or external sensors. If the alarm is triggered 3
times by the same sector then the particular sector will be bypassed. (i.e. the sector will become inactive.) The sector will
only be bypassed for one arming period. The next time the system is armed the sector that was bypassed will again
become active.
