RHINO Rhino JAGv3 Скачать руководство пользователя страница 11 | Manualshive

Страница: 11 / 26

RHINO Rhino JAGv3 Скачать руководство пользователя страница 11

11

Turbo Timer Run Time

16

OFF

This feature is used for setting the run time for both
interface and onboard turbo timers. Refer to Turbo Timer
Instructions.

Onboard Turbo Timer

17

OFF

When turned ON this feature activates the on-board turbo
timer which allows the turbo timer to be shut down early via
button 2. To set up the on board turbo timer, refer to Turbo
Timer Instructions.

3 second Panic Delay /
Instant Panic

18

ON

When this feature is ON button 3 needs to be held for 3
seconds to activate panic.

TransTX Upgrade Mode
(Only required if the old style
OEM enhancement is used)

19

OFF

When this feature is turned on then the Transformer module
may be interfaced to allow the user to arm and disarm their
vehicle via the factory remote control.

If this featured is turned on then a single beep will be
produced. If this feature is turned off then no beeps will be
heard.

Auto Immobilise Override

20

OFF

When this feature is turned ON the vehicle will not auto
immobilise.

Wireless Keypad Mode

21

OFF

When  this  feature  is  turned  on  then  the  Wireless  Keypad
may  be  used  to  disarm  the  vehicle  while  still  using  the
standard  factory  remotes  to  lock  and  unlock  the  vehicle.
See the Wireless Keypad instructions for further details.

If  this  featured  is  turned  on  then  a  single  beep  will  be
produced. If this feature  is  turned  off then no  beeps will be
heard.

Courier mode

22

OFF

When  this  feature  is  turned  on  then  the  Wireless  Keypad
may  be  used  to  disarm  the  vehicle  while  still  using  the
standard  factory  remotes  to  lock  and  unlock  the  vehicle.
See the Wireless Keypad instructions for further details.

If  this  featured  is  turned  on  then  a  single  beep  will  be
produced. If this feature  is  turned  off then no  beeps will be
heard.

«
...
9
10
11
12
13
...
»

Содержание Rhino JAGv3



























Отзывы:

Нет отзывов