background image

6

Your Rhino

®

 Pro-Series

 Gas Powered 

Driver is an efficient and effective power 

tool designed and developed to tackle a 

difficult and time consuming task; driving 

posts. The extended handle accessory is 

intended to make driving tall posts easier. 

Safe operating practices must be followed 

while operating the post driver with the 

extended handles. It is very important to 

understand that your post driver is a very 

powerful machine; it has to be to do the 

very difficult job it is designed to perform. 

You must read and understand your post 

driver and extended handle operating 

instructions before using the post driver. 

It is also very important that you make 

sure all operators are trained to operate 

your post driver safely with the extended 

handle attachment. If you or any operator 

doesn’t understand any of the instructions 

in this manual, call Rhino Tool Company 

at 866-707-1808 or 309-853-5555 and we 

will assist you with any questions you may 

have about using the unit.

AVOID SERIOUS 

INJURY OR DEATH 

READ THIS MANUAL BEFORE  

USING YOUR POST DRIVER

Visually inspect your Multi-Pro

 Post 

Driver before use. The interior of the 

chuck tube should be checked for obstruc-

tions, damage or wear to the chuck tube 

and anvil inside. The outer surfaces of the 

driver should also be inspected for any 

defects. Do not use the Multi-Pro

 if there 

is any damage or wear until the damage or 

wear is corrected and repaired.

Check all fluid levels, i.e. engine oil and 

fuel and fill as needed as per manufac

-

turer’s specifications. 

(Fig. 1)

Proper oil level is essential to 

the operation of the post driver. 

Overfilling of the oil will result in loss of 

power and may cause permanent damage 

to the engine.

USE ALL  

RECOMMENDED 

SAFETY EQUIPMENT.

Rest the driver on a solid surface, i.e. 

tailgate, bench, or clear, solid ground and 

posture your body in a safe position. DO 

NOT start the driver anywhere but an 

open, well-ventilated area. It is recom-

mended that the Multi-Pro

 only be used 

outdoors and never inside an enclosed 

building.

!

WARNING

!

DANGER

!

CAUTION

IMPORTANT

NOTE

!

WARNING

!

DANGER

!

CAUTION

IMPORTANT

NOTE

!

WARNING

!

DANGER

!

CAUTION

IMPORTANT

NOTE

Fig. 1

Upper limit of 

engine oil.

Lower limit of 

engine oil is end 

of dipstick.

POST DRIVER & EXTENDED HANDLE OPERATING INSTRUCTIONS

Содержание Pro Series 301250

























Отзывы: