RHINO Pro Series 301250, Руководство пользователя

Страница: 12 / 24

Installing an Alternative Chuck
Some of the Pro-Series
™
drivers have a
quick change design that allows the opera-
tor to quickly remove the standard master
chuck and install an alternative chuck
configuration for the post driving applica-
tion. Please refer to the manual that came
with your Pro-Series
™
post driver model
for instructions on changing the standard
master chuck. If you need a chuck option
for a specific post, contact your Rhino
Tool Company representative to inquire if
there is an option available.
NEVER REFUEL
WITH THE ENGINE
HOT OR RUNNING: Never refuel your
Multi-Pro
™
with the engine hot or run-
ning as there is a possibility the flammable
fumes from the gasoline can ignite, caus-
ing severe injury and/or damage to your
Multi-Pro
™
and surrounding area. Follow
engine manufacturer’s instructions for the
refueling of the engine.
DO NOT OPEN
CRANKCASE COV-
ER WHILE ENGINE IS RUNNING.
With each use check the engine oil level,
air filter, and all fasteners. If necessary,
add oil, clean or replace the air filter and
tighten any loose nuts, bolts, or any other
fastener. (See page 6 for engine oil level)
Change engine oil as per engine manu-
facturer’s specifications. Dispose of used
oil in accordance with any local, state, or
federal regulations.
Refer to the Service Instructions that
came with your post driver for more
details regarding proper maintenance.
Following the service requirements for the
Pro-Series
™
will insure years of trouble
free post driving. Always refer to the
Honda GX35 manual for maintenance
and service on the engine. The following
instructions are for the Rhino
®
Pro-Series
™
Extended Handle accessory only.
NEVER SERVICE
WITH ENGINE
HOT OR RUNNING
Before any service is performed, remove
the spark plug wire from the spark plug
and ground it to the engine body to pre-
vent any accidental start-up of the engine.
Empty all fuel and oil from the engine as
specified by the Honda GX35 manual that
came with your Rhino
®
Pro-Series
™
post
driver before beginning any installation
or servicing of your post driver. Please
responsibly discard any oil or fuel that will
not be reused.
Rhino
®
Pro-Series
™
Extended Handles
require assembly and installation. Inspect
the product carefully when unpacking
to make sure no breakage or damage oc-
curred during shipping. Do not assemble
or operate this accessory if any parts are
damaged or missing. Call 1-866-707-1808
for assistance with replacement parts.
10
!
WARNING
!
DANGER
!
CAUTION
IMPORTANT
NOTE
!
WARNING
!
DANGER
!
CAUTION
IMPORTANT
NOTE
!
WARNING
!
DANGER
!
CAUTION
IMPORTANT
NOTE
POST DRIVER & EXTENDED HANDLE OPERATING INSTRUCTIONS