RHINO MNVR Series, Руководство пользователя

Страница: 83 / 206

74
 Domain: The domain name registered on the DDNS service provider website.
 User name/password: Input the user name and password got from the DDNS
service provider. Make sure you have logged in the DDNS service provider website
to register an account (user name and password).
 Interval: After DDNS boots up, it sends out refresh query regularly. The unit is
minute.
4. Click OK.
Step 4 Click Apply or Save to complete setup.
Enter Network interface.
Step 5 Click OK button.
Open a browser and input domain name, click Enter button.
The setting is right if you can view device WEB interface. Otherwise, please check the
parameters.
4.3.2.2 Email
After you set email function, system can send out an email once there is a video detection event,
abnormality event etc.
Step 1 On the main menu, from Setting->Network,
Enter Network interface.
Step 2 Click Network service,
Enter network service interface.
Step 3 Configuring email.
1. Double click email,
Enter email interface. See Figure 4-59.
2. Set parameters.

SMTP server: Please input your email SMTP server IP here.
 Port: Please input corresponding port value here.
 User name: Please input the user name to login the sender email box.
 Password: Please input the corresponding password here.
 Sender: Please input sender email box here.

Title: Please input email subject here. System support English character and Arabic
number. Max 32-digit.
 Receiver: Please input receiver email address here. System max supports 3 email
boxes.
 SSL enable: System supports SSL encryption box.

Interval: The send interval ranges from 0 to 3600 seconds. 0 means there is no
interval.
 Health email enable: Please check the box here to enable this function. This
function allows the system to send out the test email to check the connection is OK
or not.

Interval: Please check the above box to enable this function and then set the
corresponding interval. System can send out the email regularly as you set here.
Click the Test button, you can see the corresponding dialogue box to see the email
connection is OK or not. See Figure 4-60.
3. Click OK button.
Step 4 Click Apply or Save to complete setup.