RHINO MNVR Series, Руководство пользователя

Страница: 202 / 206

193
 PTZ decoder and NVR protocol is not compatible.
 PTZ decoder and NVR address is not compatible.

When there are several decoders, please add 120 Ohm between the PTZ decoder A/B
cables furthest end to delete the reverberation or impedance matching. Otherwise the
PTZ control is not stable.

The distance is too far.
12. Cannot log in client-end or web.
There are following possibilities:
 For Windows 98 or Windows ME user, please update your system to Windows 2000 sp4.
Or you can install client-end software of lower version. Please note right now, our NVR is
not compatible with Windows VISTA control.
 ActiveX control has been disabled.
 No dx8.1 or higher. Please upgrade display card driver.

Network connection error.
 Network setup error.
 Password or user name is invalid.

Client-end is not compatible with NVR program.
13. There is only mosaic no video when preview or playback video file remotely.
There are following possibilities:
 Network fluency is not good.
 Client-end resources are limit.

There is multiple-cast group setup in NVR. This mode can result in mosaic. Usually we
do not recommend this mode.
 There is privacy mask or channel protection setup.

Current user has no right to monitor.

NVR local video output quality is not good.
14. Network connection is not stable.
There are following possibilities:
 Network is not stable.

IP address conflict.

MAC address conflict.
 PC or NVR network card is not good.
15. USB backup error.
There are following possibilities:
 Burner and NVR are in the same data cable.

System uses too much CPU resources. Please stop record first and then begin backup.

Data amount exceeds backup device capacity. It may result in burner error.
 Backup device is not compatible.

Backup device is damaged.
16. Alarm signal cannot been disarmed.