RHINO AGM52 Скачать руководство пользователя страница 2

Страница: 2 / 186

To the Owner/Operator/Dealer

All implements with moving parts are potentially hazardous. There is no substitute for a cautious, safe-

minded operator who recognizes the potential hazards and follows reasonable safety practices. The

manufacturer has designed this implement to be used with all its safety equipment properly attached to

minimize the chance of accidents.

BEFORE YOU START!!Read the safety messages on the implement and shown in your manual. Observe

the rules of safety and common sense!

WARRANTY INFORMATION:

Read and understand the complete Warranty Statement found in this Manual. Fill out the Warranty

Registration Form in full and return it to within 30 Days. Make certain the Serial Number of the Machine is

recorded on the Warranty Card and on the Warranty Form that you retain.

Содержание AGM52



























































































































































































Результаты поиска

Содержание AGM52

Отзывы:

RHINO AGM52, Руководство оператора, Страница: 2 / 186

Результаты поиска

Содержание AGM52

Отзывы: