RHINO AGM52 Скачать руководство пользователя страница 133 | Manualshive

Страница: 133 / 186

RHINO AGM52 Скачать руководство пользователя страница 133

OPERATION

Pre-Operation Inspection and Service

Before each use, a pre-operation inspection and service of the implement and tractor must be performed.
This includes routine maintenance and scheduled lubrication, inspecting that all safety devices are equipped and

functional, and performing needed repairs. DO NOT operate the unit if the pre-operation inspection reveals any

condition affecting safe operation. Perform repairs and replacement of damaged and missing parts as soon as

noticed. By performing a thorough pre-operation inspection and service, valuable down time and repair cost can be

avoided.

OPS-U-0029

O

PER

A

T

IO

N

Always disconnect the main PTO Driveline from the Tractor before performing service on

the Implement. Never work on the Implement with the tractor PTO driveline connected

and running. Rotating Parts, Blades or Drivelines could turn without warning and cause

immediate entanglement, injury or death.

(S3PT-11)

Never work under the Implement, the framework, or any lifted

component unless the Implement is securely supported or blocked

up to prevent sudden or inadvertent falling which could cause

serious injury or even death.

(SG-14)

Periodically inspect all moving parts for wear and replace when

necessary with authorized service parts. Look for loose fasteners,

worn or broken parts, and leaky or loose fittings. Make sure all

pins have cotter pins and washers. Serious injury may occur from

not maintaining this machine in good working order.

(SG-21)

AGM 52-62-72-82

10/10

Operation Section 4-23

© 2010 Alamo Group Inc.

«
...
131
132
133
134
135
...
»

Содержание AGM52



























































































































































































Отзывы:

Нет отзывов