RHINO AGM52 Скачать руководство пользователя страница 139

Страница: 139 / 186

OPERATION

Starting the Tractor

The procedure to start the tractor is model

specific. Refer to the tractor operator’s manual for

starting procedures for your particular tractor.

Consult an authorized dealer if the starting

procedure is unclear. Ensure the 3-point control

lever is in the lowered position and the PTO is

disengaged before starting the tractor.

OPS-U-

0033

PER

Brake and Differential Lock Setting

Make sure the tractor brakes are in good

operating condition. Tractor brakes can be set to

operate independently allowing single rear wheel

braking action or locked together to provide

simultaneous rear wheel braking. FOR MOST

DRIVING AND OPERATING CONDITIONS, THE

BRAKE PEDALS SHOULD BE LO KED

TOGETHER TO PROVIDE THE MOST

EFFECTIVE BRAKING ACTION.

Always disengage the tractor differential lock

when turning. When engaged the differential lock

will prevent or limit the tractor from turning. During

normal cutting conditions, locking the differential

provides no benefit and should not be used.

OPSU-0013

Be aware of the operating conditions. Do not operate the Tractor with weak or faulty brakes.

When operating down a hill or on wet or rain slick roads, the braking distance increases; use

extreme care and reduce your speed in these conditions. When operating in traffic, always

use the Tractor’s flashing warning lights and reduce your speed. Be aware of traffic around

you and watch out for the other guy.

AGM 52-62-72-82

10/10

Operation Section 4-29

Содержание AGM52



























































































































































































Результаты поиска

Содержание AGM52

Отзывы:

RHINO AGM52, Руководство оператора, Страница: 139 / 186

Результаты поиска

Содержание AGM52

Отзывы: