RHINO AGM52 Скачать руководство пользователя страница 112

Страница: 112 / 186

OPERATION

Information on the Machine

The materials used for building RHINO mowers have been chosen according to the tasks for which the machine has

been designed and built: any non-conforming use can cause damages to persons and property and affect the

operation of the machine.

Conforming use of the mower also specifically includes compliance with operating, repair and maintenance instructions

contained in this manual.

RHINO is in no event liable for non-conforming use of the machine.

RHINO is not liable for any damages and injuries, including severe injuries, to operator and other people or property

resulting from any unauthorised changes or modifications to the machine.

Proper operation of the machine and compliance with the instructions contained in the manual and safety precautions

will reduce the risk of accidents and injuries and ensure higher performance, while extending machine life and reducing

the risk of troubles to the lowest level.

RHINO shall in no event be liable for failure to comply with the safety

instructions given in the manual.

Identification of the machine

The machine identification plate, located on the frame, bears the Manufacturer’s data, the model, the

serial number

and the mass of the machine.

Location of EC plate on the machine:

When ordering spare parts always use the model number, frame number and year of manufacturing.

PER

AGM 52-62-72-82

10/10

Operation Section 4-2

Содержание AGM52



























































































































































































Результаты поиска

Содержание AGM52

Отзывы:

RHINO AGM52, Руководство оператора, Страница: 112 / 186

Результаты поиска

Содержание AGM52

Отзывы: