RHINO AGM52 Скачать руководство пользователя страница 140

Страница: 140 / 186

OPERATION

Working Position

To move from the transport position to the work position proceed as follows:

BEFORE STARTING OPERATION, MAKE SURE THERE ARE NO PEOPLE OR ANIMALS

IN THE VICINITY OF THE MOWER.

1. Send the cylinder shaft backwards slightly but keep rope 3 stretched until pin 2 is unlocked. (See Figure 12)

2. Extend the cylinder until the disc carrier bar is horizontal.

3. Lower the mower, fasten adjustment chain 2 to the tractor’s top link support bracket and adjust to maintain the

ground-to-linkage height of 19.7”.(See Figure 13)

4. Lower protection plate and check that the driveline is connected to mower.

PER

Make sure the adjustment chain is always well stretched when machine is working to prevent

pin from being damaged.

AGM 52-62-72-82

10/10

Operation Section 4-30

Содержание AGM52



























































































































































































Результаты поиска

Содержание AGM52

Отзывы:

RHINO AGM52, Руководство оператора, Страница: 140 / 186

Результаты поиска

Содержание AGM52

Отзывы: