background image

  I have informed the Purchaser of this product of Warranty terms, provisions, and procedures that are applicable, reviewed the contents of the Operator’s Manual

including safety equipment, safe operation, and maintenance, reviewed the Safety Signs on implement (and tractor if possible), shown the AEM Mower Safety
Practices Video, and reviewed Purchaser’s responsibility to train his operators in safe operation.

  IMPLEMENTS: I have explained that Deflectors, Chain Guards, or Solid Skirts must be maintained in good repair and installed except in areas where persons,

vehicles, livestock, or other property will not be endangered by thrown objects and where such safety equipment would prevent the mower’s reasonable performance
of its assigned task.

  DRIVELINES:  I have made certain that all driveline, gearbox, and other shields are in good repair and fastened securely in place to prevent injuries  from

entanglement or thrown objects.

   HYDRAULIC MACHINES:  I have explained the necessity of using clean hydraulic oil, changing filters as instructed, stopping leaks, damage caused by

operating with over-heated oil, caring for hoses, using hoses of proper rating, the necessity of maintaining the specified operating pressure, and the potential hazard
of oil's penetrating the skin.

  BOOM-TYPE or FOLDING-TYPE IMPLEMENTS:  I have explained that it is not possible to guard against thrown objects when the head is lifted off ground

and that operator is responsible to watch out for persons in the area.  I have explained that the lifted mower head or boom can contact overhead obstructions with
damage to cables and telephone lines and possible injury.  I have explained that the extended head or boom or retracted boom can contact power lines with resulting
electrocution injury or death and that operator is responsible for keeping clear of such hazards.

Dealer’s Signature ___________________________________ Date ______________

I have been instructed on the  paragraphs above, received and have been shown the AEM Mower Safety Practices Video and have been instructed in the contents
of the Operator’s Manual including safety signs, safety equipment, safe operation, maintenance, and the potential hazards of unauthorized alteration or modification
of the product.  I have been informed of the warranty provisions and know that the warranty is not in effect until this form is received by Alamo Group.
I understand the Implement Guarding statements above and the potential hazards of operating without such guards. I understand that the operator is responsible for
the safety of others in the area. I have examined the product and accept it as being complete and in satisfactory condition with all required guards.

Purchaser’s Signature ___________________________________ Date ______________

Servis-Rhino Model

Serial No.

Purchase Date

M.I.

First Name

Purchaser
Last Name
Street & No., RFD,
Box, &/or Apt. No.

State or
Province

State or
Province

ZIP

ZIP

City

City

Dealer

MONTH

DAY

YEAR

SERVIS-RHINO

®

 WARRANTY REGISTRATION INFORMATION

 TEAR • 

TEAR • 

TEAR • 

TEAR • 

TEAR • 

TEAR • 

TEAR • 

TEAR • 

TEAR • 

TEAR • 

TEAR • 

TEAR • 

TEAR • 

TEAR • 

TEAR • 

TEAR • 

TEAR • 

TEAR • 

TEAR • 

TEAR • 

TEAR • 

TEAR • 

TEAR • 

TEAR • 

TEAR

Purchaser's Signature _________________________ Date __________ Dealer's Signature ________________________ Date __________

PRE-DELIVERY SERVICE

CHECK AND ADJUST OR LUBRICATE AS REQUIRED

See Operator’s Manual for Details

Inspection Performed - Warranty and Safety Procedures Explained - Installation Complete

LUBRICATION  & HYDRAULICS

Gearboxes &  Speed Increaser (Oil Levels)
Hydraulic Oil Level (External. Tank)
Tractor Hydraulic Oil Level
Hydraulic Hoses (No Kinks, Binds, or Leaks)
Hydraulic Hose Connections are Tight (No Leaks)

MOWER

Spindle And Motor Bolts Properly Torqued
Spindle Housing Bearings are lubricated
Blade Carrier Bolts Properly Torqued / Retaining Pin In Place
Mower Cutting Height And Level Adjusted
Belt Alignment And Tension Adjusted
Driveline Clutch (Torque Limiter) (Adjust And Run In)
All Hardware Properly Torqued
Tire Air Pressure / Lug Nuts (Correct Torque)
Wheel Bearings (Check, Grease, And Preload)

ATTACHMENTS & INSTALLATION

Thrown Object Deflectors Front And Rear
Correct Blade Rotation Direction
Wing transport locks and latches
Mower head transport support bracket
All Bolts - Pins And Nuts (Proper Torque)

MOWER TO TRACTOR CONNECTION

Draw Bar Length (Check And Set)
Axle Height (Adjusted)
Cutting Height (Adjust)
Mount Kit Pre-Operation Check Complete
Mower Wing (Adjust Level With The Center)
Mower Wing (Check For Proper Raising Operation)
Pull Type Hitch (Height Adjustment)
Mounting Hardware Properly Torqued

SAFETY ITEMS

Protective Shields (Operation And Installation)
S.M.V. Emblem (Installed)
Neutral Safety & Cut - Off Switches work properly
Safety Decals (Installed in good condition)
Operator’s Manual (Supplied in Canister)
AEM Mower Safety Manual (Supplied in Canister)
AEM Mower Safety Video has been shown to Purchaser     _________

                         

      Pur. Intitials

AEM Mower Safety Video has been presented to Purchaser ________

                            

    Pur. Intitials

BEFORE MAILING WARRANTY CARD, MAKE SURE ALL INFORMATION IS LEGIBLE

Do not tear.

Do not tear.

Содержание 5047C

















































































Отзывы: