RHINO 5047C, Руководство оператора

Страница: 42 / 80

OPERATION
Operation Section 4-6
OPERA
TION
© 2005 Alamo Group Inc.
7600A 06/05
2.6 Front End Weight
A minimum of 20% total tractor weight must be maintained on the tractor front end at all times. Front end weight
is critical to maintain steering control and to prevent the tractor from rearing up while driving. If the front end is too
light, add weight until a minimum of 20% total weight is reached on the front tires. Front weights and weight
carriers can be purchased through an authorized tractor dealership. Add weight as required.
The horsepower required to operate the implement depends on several operating factors including terrain condition,
operator experience, condition of the implement and tractor, and other factors. The recommended tractor HP for
the SNOW BLOWER 7600A is 50-150hp (67-134kw). Operating the implement with a larger tractor will greatly
increase the risk of damaging the implement.
2.3 Tractor Horsepower
2.5 Tractor Hyrdaulics
To be able to operate the hydraulic chute rotator and the lift cylinders the tractor requires 13 gpm or 15 gpm dual
remote outlet. The hydraulic chute rotator allows you to rotate your chute to blow snow at different angles. Be
particularly careful when rotating the chute at different angles, be sure there are no bystanders or animals within
200 ft. in the direction you are blowing snow.
DANGER!
Never crawl under a raised Implement supported solely by the Tractor 3-
Point hitch. Release of the control lever or mechanical failure will result
in the Implement falling and possible injury or death. Always securely
block up the Implement before crawling underneath to perform repairs and
service.
(S3PT-19)
The tractor 3-point hitch must be rated to lift the 7600A
Snow Blower.
The Snow Blower can attach to tractor’s with a 3-pt
hitch frame.The 7600A Snow Blower is easily adaptable
to all standard Category 2 and 3 hitch arangements.
Refer to the parts manual of the Snow Blower to get
more details of which pins and bushings you will need
for your tractor. Refer to the tractor operator’s manual
for the category of the tractor used. If the hitch does
not conform to ASAE dimensions, the implement may
not fit or raise properly. Consult an authorized dealer
for possible modification procedures to mount
nonconforming hitches. Use the correct hitch pins for
the hitch being used.
2.4 3-Point Hitch
Lift Arms
Attach Here
Top Link
Attaches Here