RHINO 2409TL страница 69 Скачать руководство пользователя | Manualshive

Страница: 69 / 104

background image

OPERATION

2409TL 01/11

Operation Section 4-23

© 2011 Alamo Group Inc.

OPERA

T

ION

Always have a heavy attachment, such as a bucket mounted on loader when it is removed
from tractor.

It is important not to put excessive weight on parking stands with lift cylinder retraction.
Damage may result.

Never leave the Implement and Power Unit unattended while the Implement is in the raised
position. Accidental operation of a lifting lever or a hydraulic failure may cause the
implement to suddenly fall causing serious injury or possible death to anyone who might
inadvertently be under the Implement. Lower the implement carefully to the ground. Do not
put hands or feet under lifted components.

(SPU-3)

Before dismounting the tractor and loader, lower the loader to the ground or onto solid
support blocks. Sudden dropping of the loader and attachment could result in serious
injury.

(SL-38)

Make sure the hydraulic quick disconnects are fully seated into the connections. Do not use
the loader if the hydraulic connection is leaking. Leaking oil could allow the loader to fall
resulting in a serious crushing injury.

(SL-22)

If the loader valve controls fail to functions properly discontinue use of the tractor and
loader until the controls are properly repaired. Sudden or unexpected movement or
dropping of the loader and attachment could result in serious injury.

(SL-31)

Make sure all air is purged from the hydraulic system before using the loader. Air in the
system can cause the loader to respond sluggishly or with unexpected movement. The air
can be purged from the cylinder lines by fully cycling the cylinders several times from the
fully closed to fully open position. Sudden or unexpected movement or dropping of the
loader and attachment could result in serious injury.

(SL-32)

Do not raise the loader on a hillside. Do not transport across a slope with
a raised loader. When the loader is raised, the center of gravity of the
tractor and loader is raised increasing the potential for the tractor to tip
over. Tractor wheel contact with any wash out, drop off or the ground
obstruction with a raised loader could result in the tractor tipping over and
causing serious bodily injury.

(SL-21)

«
...
67
68
69
70
71
...
»

Содержание 2409TL









































































































Отзывы:

Нет отзывов

Похожие инструкции для 2409TL

Бренд: Takeuchi Страницы: 27

Бренд: Case Страницы: 51

Бренд: Case Страницы: 61

Бренд: Case Страницы: 81

Бренд: jcb Страницы: 41

Бренд: jcb Страницы: 2

Бренд: Toro Страницы: 8

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды