RHINO 2409TL Скачать руководство пользователя | Manualshive

Страница: 10 / 104

background image

SAFETY

2409TL 01/11

Safety Section 1-6

© 2011 Alamo Group Inc.

SAFETY

Equipment Operation Safety Instructions and Practices

This Implement may be wider than the Tractor. Be careful when operating or transporting
this equipment to prevent the Implement from running into or striking sign posts, guard rails,
concrete abutments or other solid objects. Such an impact could cause the Implement and
Tractor to pivot violently resulting in loss of steering control, serious injury, or even death.
Never allow the Implement to contact obstacles.

(S3PT-12)

Never grasp control levers when mounting the machine.

(SBH-4)

The Boom is designed only to position and operate the Bucket which is attached to it. Never
attempt to lift, pull, or push other solid objects with the boom or bucket. Serious injury could
result from a structural failure when the Boom is used for purposes other than those for
which it was designed.

(SBH-9)

BEFORE leaving the tractor seat lower the implement, set the parking
brake and/or set the tractor transmission in parking gear, disengage the
PTO, stop the engine, remove the key, and wait for all moving parts to
stop. Place the tractor shift lever into a low range or parking gear to
prevent the tractor from rolling. Never dismount a Tractor that is moving
or while the engine is running. Operate the Tractor controls from the
tractor seat only.

(SG-9)

Do not mount or dismount the Tractor while the tractor is moving. Mount
the Tractor only when the Tractor and all moving parts are
completelystopped.

(SG-12)

Start tractor only when properly seated in the Tractor seat. Starting a
tractor in gear can result in injury or death. Read the Tractor operators
manual for proper starting instructions.

(SG-13)

Operate the Tractor and/or Implement controls only while properly seated in the Tractor seat
with the seat belt securely fastened around you. Inadvertent movement of the Tractor or
Implement may cause serious injury or death.

(SG-29)

«
...
8
9
10
11
12
...
»

Содержание 2409TL









































































































Отзывы:

Нет отзывов

Похожие инструкции для 2409TL

Бренд: jcb Страницы: 6

4CX AEC - POLE MASTER PLUS

Бренд: jcb Страницы: 11

Бренд: Baumalight Страницы: 40

Бренд: Bush Hog Страницы: 1

Бренд: Bush Hog Страницы: 1

Бренд: Bush Hog Страницы: 1

Бренд: Bush Hog Страницы: 1

Бренд: Bush Hog Страницы: 1

Бренд: Bush Hog Страницы: 1

Бренд: Bush Hog Страницы: 1

Бренд: Bush Hog Страницы: 1

Бренд: Bush Hog Страницы: 1

Бренд: Bush Hog Страницы: 1

Бренд: Bush Hog Страницы: 1

Бренд: Bush Hog Страницы: 1

Great Bend Compact Loaders

Бренд: Bush Hog Страницы: 8

Great Bend Ag Loader

Бренд: Bush Hog Страницы: 8

Бренд: Bush Hog Страницы: 12

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды