RHINO 2409TL Скачать руководство пользователя | Manualshive

Страница: 12 / 104

background image

SAFETY

2409TL 01/11

Safety Section 1-8

© 2011 Alamo Group Inc.

SAFETY

Do not let the loader or attachment contact electrical power lines. Contact
with electrical power lines can result in serious injury or electrocution. If
the loader attachment contacts a power line remain in the tractor seat
until the power has been shut off. Stepping off the tractor can permit
electrical current to pass through the body resulting in electrocution.

(SL-09)

Store the grapple bucket or bale spear attachment with the point(s) on the
ground. Walking into the point of the bale or grapple spear can cause
serious bodily injury. Never drive the bale spear or grapple bucket
attachment forward if a bystander is in front of the loader.

(SL-10)

Only mount the loader on a tractor that is listed on the mounting instructions. Never mount
on a tricycle steering front axle. Move the tractor front and rear wheels to the widest spacing
and add the recommended rear tractor ballast to prevent tractor tip over. Keep the tractor
tires properly inflated. Maintain at least 25% of the total Tractor and Loader weight including
the maximum load in the bucket or attachment on the rear axle. Always wear your seatbelt
and make sure the ROPS structure is fully deployed to prevent serious injury or death from
the tractor tipping over.

(SL-11)

Carry the loader and attachment low when transporting to reduce the
potential of the tractor tipping over. Transport on slopes only at slow
speeds and use gradual turning angles. Tractor wheel contact with any
wash out, drop off or ground obstruction with a raised loader could result
in the tractor tipping over and causing serious injury.

(SL-12)

Do not work from the loader or attachments. Do now allow any riders on
the loader, tractor or attachments. Falling off the loader could result in
serious injury and/or tractor run over.

(SL-14)

«
...
10
11
12
13
14
...
»

Содержание 2409TL









































































































Отзывы:

Нет отзывов

Похожие инструкции для 2409TL

Бренд: AVANT Страницы: 108

Solar Gard Computer Cut

Бренд: SAINT-GOBAIN Страницы: 5

Бренд: Allis-Chalmers Страницы: 59

Бренд: Kobastar Страницы: 53

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды