HEAT PUMP AND TANK ASSEMBLY
32
21.
Tank Sensor Cable Connection:
Insert the tank sensor cable plug to the connector on the underside of
the control box.
The plug is polarised and can only be inserted one way.
Ensure the plug fully engages the locking feature on the connector.
22.
Power Cable Connection:
Insert the four pin power cable plug to the connector on the underside of the
control box.
The plug is polarised and can only be inserted one way.
SK6502 AD A4 5/08
CONTROL BOARD HEAT PUMP - 325L
WITH SENSOR CABLE & POWER CABLE
TANK SENSOR
CABLE PLUG
POWER CABLE
PLUG
Steps 21 and 22
connect power cable and tank sensor cable
23.
Positioning of Water Heater:
Complete final positioning of the water heater.
Ensure the heat pump module is firmly seated on the level slab or solid base.
24.
Water Connections:
Connect the cold water supply and the hot water pipe work to the water heater.
Connect the temperature pressure relief valve and its drain line.
Refer to
“Connections – Plumbing”
on page 34.
25.
Water Supply:
Turn on the cold water supply and fill the water heater.
Check the pipe work and the connection points for the flexible braided hoses for leaks
Refer to
“To Fill And Turn On The Water Heater”
on page 38, however the electrical supply should
not be turned on at this stage.
