HEAT PUMP AND TANK ASSEMBLY
27
4.
Lower Front Cover:
Refit the lower front cover.
Step 4
Step 5
refit lower front cover
remove tape from tank sensor cable
5.
Tank Sensor Cable:
Remove tape from tank sensor cable and unfurl.
6.
Foam Tape:
(410 litre storage tank only) – Retrieve the length of foam tape from the kit supplied with
the 410 storage tank.
The foam tape is to be applied to the bottom at the front of the 410 litre storage tank.
The ends of the foam tape are to line up with the two vertical slots in the jacket.
The mid point of the tape (lengthways) is to line up over the join between the jacket of the storage tank
and the jacket bottom.
Remove the backing from the foam tape and apply the foam tape to the storage tank.
Step 5
–
apply foam tape to 410 litre storage tank
7.
Heat Pump Module:
Remove all packaging including the carton base from the heat pump module and
position in its intended location at the storage tank.
CAUTION:
The heat pump module weighs approximately 42 kg. Use the hand holes provided in the
sides of the packaging. Good lifting practice should be followed.
