Rheem 18, Руководство пользователя и инструкции по установке

Страница: 32 / 80

TEMPERATURE CONTROL – DELUXE
32
Bath Fill Mode
– Explanatory Notes
To operate the Bath Fill mode:
1. Turn off all Deluxe controllers

It is advised to turn off all Deluxe controller(s) before
activating the Bath Fill mode.
Refer to the notes on the Bathroom Deluxe
controllers on page 28.
The Deluxe controllers do not need to be on to set
the bath fill temperature and bath fill water volume
and to turn on the Bath Fill mode.
2. Pull down the front panel on the Deluxe controller.
The BATH FILL VOLUME and BATH FILL
TEMPERATURE up (

) and down (

) buttons will be
exposed.
3. Set the bath fill temperature

Press the BATH FILL TEMPERATURE

( up button) or the BATH FILL TEMPERATURE

( down button).
The first press of either the BATH FILL
TEMPERATURE

( up button) or the BATH FILL
TEMPERATURE

( down button) will bring up the
last selected bath fill temperature setting.
While the bath fill temperature is displayed, each
subsequent
press of the BATH FILL
TEMPERATURE

( up button) or BATH FILL
TEMPERATURE

( down button) will change the
temperature setting.
Refer to
“Temperature Adjustment – Deluxe
Controllers”
on page 25.
When the BATH FILL TEMPERATURE

( up button) is pressed and the temperature
setting is increased, the voice prompt will sound;
“hot water temperature has been increased”
When the BATH FILL TEMPERATURE

( down button) is pressed and the temperature setting is
decreased, the voice prompt will sound;
“hot water temperature has been decreased”
The selected temperature setting will be displayed in the temperature display panel and will be
displayed on all Deluxe controllers.
The temperature display panel will go blank 3 seconds after the last press of either of the bath fill
temperature adjustment buttons.
The bath fill temperature setting will be remembered when the BATH
FILL button is pressed “on”.
Rheem
BATH
(
l
)
4 0
°C
1 2 0
ACTIVE
ON/OFF BATH FILL
B1
BATH FILL
VOLUME
BATH FILL
TEMPERATURE
ACTIVE
Light on
2.
Adjust
Temperature
3.
Open hot
tap
4. Hot Water
Press
1.
ON/OFF
Bath
Water
Volume
Bath
Fill
Temp
Bath Fill
Set Bath Fill Water Volume
and Temperature
1. 2.
Bath Fill
completed
(automatic)
Bath Fill Button
(Red light flashes)
6. Close hot tap
5.
Press Bath
Fill Button
(Red light on)
3.
4. Open hot tap
BATH FILL
Press Bath
Fill Button
(R ed light off)
7.
BATH FILL
Rheem
BATH
( l )
4 0
°C
1 2 0
ACTIVE
ON/OFF BATH FILL
B1
BATH FILL
VOLUME
BATH FILL
TEMPERATURE
ACTIVE
Light on
2.
Adjust
Temperature
3.
Open hot
tap
4. Hot Water
Press
1.
ON/OFF
Bath
Water
Volume
Bath
Fill
Temp
Bath Fill
Set Bath Fill Water Volume
and Temperature
1. 2.
Bath Fill
completed
(automatic)
Bath Fill Button
(Red light flashes)
6. Close hot tap
5.
Press Bath
Fill Button
(Red light on)
3.
4. Open hot tap
BATH FILL
Press Bath
Fill Button
(R ed light off)
7.
BATH FILL
“hot water
temperature
has been
increased”
or
“hot water
temperature
has been
decreased”