MAN1910117 V.7 – 15/11/2012
30
12.5.14 Setting of RFID CARD
The vending machine can work with RFID pre-paid cards.
To proceed at the setting of this parameter enter in
PROGRAMMING mode, press
1
until the display shows:
PROGRAMMING
RFID CARD
Entering
2
, the video shows
max. credit card
00000000
Pressing
buttons 4
and
5
program the value of the maximum credit that can be loaded in a RFID Rhea card.
Entering again
2
, the video shows:
coin a
card
0 = acc
Press
buttons 4
and
5
to change the value of the parameter shown. Set 0 to each coin from
a
to
j
that the coin-
mech
has to accept when the RFID Rhea card is present and 1 to each coin that must not be accepted in this case.
Entering
2
, the video shows
coin a
no card 0 = acc
Press
buttons 4
and
5
to change the value of the parameter shown. Set 0 to each coin from
a
to
j
that the coin-
mech
has to accept when the RFID Rhea card is not present and 1 to each coin that must not be accepted in this
case.
13 Installation of the coin-mechanism support unit
To install the payment systems always follow the instructions supplied by the manufacturer. For information only,
the installation of a token machine is hereunder described.
1. Switch off the machine;
2. Open the front door
3. Remove the coin-mec protection inside the door; 4. Fit the coin-mechanism;
