MAN1910117 V.7 – 15/11/2012
21
2=DATA 4=CLEAN
5=MAINT.
TEST
At this point the machine is able to dispense any selection, without charge. Selection sales in the selection test
mode are counted in a separate counter (see "Reading of sales data"). To exit from the selection test mode, press
the
key
P
on the display board inside the machine.
12.5.4 Setting of special sale prices
During HAPPY TIMES (see PROGRAMMING CLOCK to activate HAPPY TIMES) also one special price for each
selection available can be memorised. To set special sale prices, in the programming mode, enter
1
until the sub-
menu
PROGRAMMING - - - -
SPECIAL PRICES - - - - -
is visualised. Enter
2
and
3
and select the price to be modified. For example:
SPECIAL PRICE X
XXXX
will appear on the video. Enter
4
and
5
to modify the value of the price videoed. Enter
1
to confirm the set data.
12.5.5 Presetting of coin-set
The set of values that the machine assigns to each signal (canal) received from the payment system is called
coin-
set
. Press
button 1
until to visualize the sub-menu:
PROGRAMMING- - - - -
-COINS- - - - - - - - - - -
Pressing
button 2
the display shows from:
COIN A
0
to:
COIN J
0
Pressing
buttons 4
and
5
change the value of the visualised coin. Press
button 1
, exit from the programming
mode, and switch the machine off and on. The machine will use the new coin-set. For further information see the
paragraph “ Modifying other operation parameters (Miscellaneous)” the parameter “single or multi vend”.
12.5.6 Modification of the operating temperature
The machine defines and regulates water temperature in the boiler. To modify the temperature thresholds, in the
programming mode, enter
button 1
until the sub-menu
PROGRAMMING
TEMPERATURE
is videoed. Entering
2
the video shows:
TEMPERATURE
Boiler XXX
