12.5.7 Storing of OUT OF ORDERS
The machine stores the last 20 OUT OF ORDERS. To read them on the display, press
button 1
until the
display shows:
STORING
OUT OF SERVICES
Pressing
button 2
, the display shows hour, day, month and year of the last 20 OUT OF ORDERS.
n. 1 OFF NNN
hh:mm gg - mm - - - aa
To delete, visualize each OUT OF ORDER and keep pressed
button 4
for some seconds.
12.5.8 Pre-setting of Product Counters down
In some versions of machines it is possible to set how many seconds a motor should work to dispense
instant product before displaying that the product inside the canister is finished. To proceed at the setting
of this parameter enter in PROGRAMMING mode, press
button 1
until the display shows:
PROGRAMMING
PRODUCT QTY - - - -
Pressing
button 2
the display shows:
QTY PRODUCT 1
[-xx]
xx
until
QTY PRODUCT 6
[-xx]
xx
Pressing
buttons 4
and
5
program the number of the seconds that the relative motor should work. To by
pass this function pre set these parameters from
PRODUCT
QTY 1
to
PRODUCT
QTY 6
at 0.
To activate this function take note for each canister of how many seconds the relative motor should work
to dispense 1 g of product. Calculate then, depending from the quantity of product that can be filled
inside the canister, how many seconds the motor should work to finish the product and pre-set the value
of the relative counter.
EG
: If inside the coffee canister, which corresponds to motor 1, you fill in 1000 g of coffee and the coffee
motor dispenses 1 g of coffee in two seconds then the canister will be empty in 2000 seconds; so you
have to program
PRODUCT QTY 1
= 2000.0.
When all selections prepared with this product are dispensed the relative counter is decreased the
available seconds. When all the seconds finish all the drinks made with this product are inhibited and the
display shows:
selection
not available
To confirm the set data press
button 1
and then press the
key
on the display board inside the machine.
When the display shows the standard sale message keep pressed for at least 8 seconds the
key
on the
display board inside the machine, until the display shows the message:
set product
OK
To set again the data in sale mode keep pressed for at least 8 seconds the
button
on the display board
inside the machine, until the display shows the message:
set product
OK
MAN1260007 V.1 – 18/12/2014
26
Содержание Horeca Large 380
Страница 33: ......
