Rheavendors Group Horeca Large 380, Руководство по установке и обслуживанию

Страница: 20 / 33

12.5 Programming sub-menus
Access to the programming sub-menus is possible at any time, after entering the programming mode
and pressing the
button 1 on the selection keypad. These sub-menus are repeated cyclically after the
last one has been displayed. The sub-menus and their display order are as follows:
PROGRAMMING- - - -
BUTTON 1 - - - - - - -
PROGRAMMING - - - -
BUTTON 2- - - - - - - -
PROGRAMMING - - - -
BUTTON 8 - - - - - - -
PROGRAMMING - - - -
TEMPERATURE - - - -
PROGRAMMING - - -
MISCELLANEOUS - -
DIAGNOSTICS - - - - -
- - - - - - - - - - - - - - - - -
SALES AUDIT - - - - -
- - - - - - - - - - - - - - - -
PROGRAMMING- - - -
CLOCK- - - - - - - - - -
REGISTRATION
OUT OF ORDERS
PROGRAMMING
PRODUCT QTY - - - -
12.5.1 Pre-setting of the buttons
The modification of throws is a delicate operation as the good operation of the machine can be affected.
As a general rule, it is recommended to keep in mind that when instant ingredients are dissolved in
water, a brief interval to rinse the mixing bowl must be foreseen at the end of the powdered ingredient
vending. This is provided by programming a dispensing time for water about 2 sec. longer than the
dispensing time for the instant ingredients. To each of the 8 buttons it is possible to associate the recipe
of any drinks. To proceed at the pre-setting of each button, in the programming mode, press
button 1
until the display shows:
PROGRAMMING- - - -
BUTTON 1- - - - - - - -
Press button 2 to visualise one of the following functions:
FUNCTIONING
INHIBITED
PRE SELECTION
If no function has to be linked to the settled button, confirm INHIBITED pressing button 1.
MAN1260007 V.1 – 18/12/2014 20