5.System Setup and Operation
How to splicing with DVI3
VSP 1314 User Manual
62
How to splicing with DVI3
Make sure equipment normal operation.Detail please refer to :
How to make
equipment normal operation
Splicing:
VSP1314 also is a seamless switcher,As a switcher use the DVI3 to input
signal,The max resolution of switcher is twice of DVI3 input,output interface
is DVI1 output and DVI2 output, and preview DVI3 signal via output
VGA;There are transverse and vertical splicing;Such as DVI3 input
is1920x1080
，
so can splicing 3840x1080 or 1920x2160.
Operation as following:
1.Press
and light up green;
2.LCD shows MENU mode,rotate the adjust knob to select Splicing;
3.Press the adjust knob to ensure and enter it;
4.Press the adjust knob to select switch,ratote to open it;
5. Press the adjust knob then rotate it to select Split Mode.Press the adjust
knob then rotate it to select Split Mode.There are three kinds of split
mode:Through
、
H1/2
、
V1/2;
Input
Output
Split
View
Split Switch
：
ON
Split Mode
：
Through
Split Output Channel: DVI1
Display Width
：
1024
Split Switch
：
OFF
Split Mode
：
Through
Split Output Channel: DVI1
Display Width
：
1024
