2.Hardware Orientation
VSP 1314 Front Panel
VSP 1314 User Manual
30
Detail please refer to
How to save parameter
.
Press button
and light up green to enter to LOAD mode,at the
same time CV1/1, CV2/2, USB1/3, DVI1/4, VGA1/5, CV3/6, CV4/7,
USB2/8, DVI2/9, VGA 2/10 all of them light up green ,the figure of 1
，
2
，
3
，
4
，
5
，
6
，
7
，
8
，
9
，
10under button is load save1~10
，
press arbitrary
button1~10 to load save.LCD will show Load From,after finish loading, the
button which selected will light out,and other 9 lights light up still.It means
can load other infomation .Press button again the green light light out it
means have exit Load mode.
LCD shows as following:
Detail please refer to
How to load parameter
SCALE/CROP
：
SCALE and CROP setting muitiplexing button
Press button,light up green to enter to SCALE mode;
Press button,light up red to enter to CROP mode;
H SIZE/H POS
：
Height and vertical position setting muitiplexing button;
Press button,light up green to enter to height setting;
Press button,light up red to enter to vertical position setting;
V SIZE/V POS
：
Width and transverse position setting muitiplexing button;
Press button,light up green to enter to width setting;
Press button,light up red to enter to transverse position setting;
Load From:
Press<1~10>to Load
