2.Hardware Orientation
VSP 1314 Front Panel
VSP 1314 User Manual
29
Detail please refer to
How to select switching effect
.
PIP mode multiplexing button
；
Press button
and light up red,that means is1/2 mode;layer 1 above
layer2
；
Press button
and light up red,that means is 2/1 mode;layer 2 above
layer1
；
LCD showss as following:
Detail please refer to
How to set picture in picture
.
SAVE and LOAD muitiplexing button;
Press button
and light up green to enter to Save mode,at the same
time CV1/1, CV2/2, USB1/3, DVI1/4, VGA1/5, CV3/6, CV4/7, USB2/8,
DVI2/9, VGA 2/10 all of them light up green ,The figure :1
，
2
，
3
，
4
，
5
，
6
，
7
，
8
，
9
，
10,down of the button also light up green,It means you can press
arbitrary button to save.And the LCD panel will show Save Sucess after
finish saving.And all the button will recover to its original state.
LCD showss as following:
PIP A/B
Save:
Press<1~10>to Save
