
NMT 552-01e
3/8
3.
Pre-assembly of the mount
For easy operation of the bolted joints, and correct torque tightening, « Anti Seize »
Installation Paste must be applied to all threads of bolts and fine adjustment spindles.
After this, keep the lubricated threads free of dust and dirt! (a Torque Table is attached
for specifications)
3.1
3.2
3.2
3.3
Connecting
Support
Mount
Steel
U-Mount
4 ft
2 SL screws M10x25
2 washers 10.5 Ø30
4 screws M8x25
4 SL washers A8
4 nuts M8
3.4
Install the reflector front side facing ground on the
packing cover. (Do not lean on the reflector during
the assembly, the reflector geométry may be
permanently damage, and degrade antenna
performances).
ELEVATION
fine adjustment
Spindle M10x100
2
brass
nuts M10
2 washers 10.5