Pg 13 of 26
System Summary > Site Scan
Using the site scan, you can scan for the presence of other AP near you. The ESSID,
BSSID, wireless mode, channel, signal strength, security mode and network mode of
the surrounding AP will be display in the table. You can use this function to select a
clean channel for your AP. Take note that there would not be any result if the
wireless function of the AP is set to disable.
Basic Setting > SNTP
Simple Network Time Protocol (SNTP) allows the AP to set its internal clock based on
periodic updates from the specified timeserver (SNTP or NTP). The time is useful in
the IP filter section, where you can configure to block certain IP address daily at a
certain time.