Pg 33 of 26
Making Changes
The changes are directly applied in the Utility.
It does not matter if all the devices have the same IP Address. The QS Utility identifies them
uniquely by their MAC Addresses.
Updating Changes
After the necessary changes have been made, the Administrator can apply the changes to the
AP. Check on the
Reboot
Checkbox and click on the
Update
button to reboot the device.
Multiple devices can be updated all at once. Use ctrl-left click to select multiple entries or type
ctrl-A to select all entries. Click on Update button to begin the update process.
To refresh the view, use the
Find
button.
