Pg 27 of 26
System Tools > Backup/Restore Settings
Use this page to preserve any good setting. You can save the configuration file into
your computer and upload it back to the AP when the setting of your AP when
necessary. In addition, you can do a factory reset and restore the AP back to factory
default setting. The factory default setting is shown in the
Factory Reset
section.
Save configuration to local device
: After you have successfully configured the AP, you can
save this “Good Config” into device memory.
Restore configuration from local device
: You can retrieve this “Good Config”, if you have
messed up some settings and do not know what the previous working setting is.
Save configuration to local PC
: After successfully configured the AP, save this “Good
Config” into the computer system.
Configuration file on local PC
: Browse to the location of the saved “Good Config” in the
computer system.
Restore configuration from local PC
: Allow restoring back to the “Good Config” from the
computer system.
Revert to factory setting
: If you have even forgotten the password to get into the
configuration pages, you would have to do a Factory Reset to the AP.
