AS
Mxxxx Series User’s Manual
Asia Pacific | EMEA | Americas
74
10.27 Configuration
– User Data
On this page you can enter descriptive texts for Customer Name
,
Site Name and each of the Ports
Customer Name:
The name of the network or the customer equipment being monitored by the ASM.
Site Name:
The name of the site on which the network or the customer equipment is located.
Tx Port Antenna References:
The names or other unique identifier for each of the Tx Antennas being monitored by the ASM.
Enable Network IDs:
Select if Network IDs are to be used in the ASM Status and Configuration screens.
Defaults:
Clicking this sets all of the descriptions to "Not Defined".
Discard Changes:
Click this button to restore the values to those present when the page was last re-displayed.
Note that if invalid values are being displayed after an Apply attempt, these values may not match the current system
configuration. In this case, just select the Configure/User Data menu item again to re-display the current configuration.
Apply:
This will attempt to save and activate the values entered. If any out of range values are present, nothing will be saved and the
problem settings will be highlighted with a red background.
