RF Technologies ART400, Инструкция по установке, эксплуатации и программированию

Страница: 61 / 69

Commercial In Confidence
61
6.8.8.2 Save Off Time
This is for power save programming and sets the time the transceiver is switched on for
during the power save cycle (Power Save Off). The Save Off Time is programmable from
100 - 1500ms in 50ms steps. The default setting is 100ms.
6.8.8.3 Save Resume Time
When a carrier is received during power save mode, the unit will come out of its powersave
mode to receive the signal. The Resume Time, is the time the receiver stays active after the
received carrier has dropped out, i.e. the time power save mode is deferred. This is
programmable between 0 - 255 seconds in 1 second steps.
6.8.9 SERIAL NUMBER
The serial number may not be altered using the set up program, it does however provide the
user with the means to read it.
6.8.10 NOTE
PAD
The notepad provides a facility for storing up to 48 ASCII characters in the modem's
memory.
6.8.11 LOCKOUT TIME MODE
Selectable either resetable or cumulative.
6.8.12 LOCKOUT TIME
Selects the transmit timeout timer period, 0 - 255 seconds in one second steps.
6.8.13 AUDIO RESPONSE
This option sets the response of the receiver’s and transmitter’s audio path to either flat or de-
/pre-emphasised. When de-/pre-emphasised is selected a 300Hz low pass filter is also
switched in.
Note:
IF INTERNAL MODEM OPERATION IS REQUIRED THE RX AUDIO RESPONSE
SHOULD BE SET TO A FLAT RESPONSE.
6.8.14 CARRIER MUTE
The receive audio path can be set to mute when no incoming carrier is detected if this option
is turned on.
6.8.15 MENU OPTIONS
6.8.15.1 Return to Main Menu
As suggested this function returns the Main Menu.
6.8.15.2 Edit Channel Data
This field takes you into the Channel Data Screen
6.8.15.3 Edit Modem Setup
This field takes you into the modem setup menu
6.8.15.3 Custom Menus
If custom options have been ordered (such as Store and Forward) then this menu will allow
access for programming.