RF Technologies ART400, Инструкция по установке, эксплуатации и программированию

Страница: 4 / 69

Commercial In Confidence
4
3.16.2 Transmission without Hardware Handshaking
3.16.3 Data Reception
3.16.4 Transmit & Receive Timing
3.16.4.1 Receiver to transmitter Switching Times
3.16.4.2 Message Duration
3.16.4.3 Transmit to Receive Switching Times
3.16.5 Radio Data Format
3.16.6 Synchronous/Asynchromus Format
3.16.7 Transmit/Receive Timing
3.17 Error Reports
3.18 Time Out Timer
3.19 Power Save Mode
3.20 RSSI Output
3.21 Temperature Measurement
3.22
Input Voltage Measurement
3.23 Real Time Clock.
3.24 External I.O.
4.0 INSTALLATION
4.1
Introduction
4.2 Power Supplies
4.3 Effective Radiated Power (ERP)
4.4 Safe Distance Calculation
4.5 Antennas, Coax Feeders & Peripherals
4.5.1 Antennas
4.5.2 Types of Antennas
4.5.3 Omni-Directional Antennas
4.5.4 Directional Antennas
4.5.5 Patch Antennas
4.5.6 Antenna Mounting
4.5.7 Polarisation
4.5.8 Alignment
4.5.9 Antenna Coax Feeder
4.5.10 Cable length Verses Signal Loss at 500MHz
4.5.11 Coax Connectors
4.5.12 VSWR Measurement
4.5.13 Lightning Arresters
4.6 Mounting
4.6.1 ART Dimensions
4.6.2 ART Mounting
4.6.3 Antenna Connection an enclosure
4.6.4 Wall Mounting Enclosure
5.0 PROTOCOLS & APPLICATIONS
5.1
Store & Forward Using Clients Protocol
5.2 Network Routing Mode
5.2.1 AT Command Set
5.2.2 Power Saving
5.2.3 Call Set Up Procedure
5.2.4 Radio Routing
5.2.5 Wake Up Procedure
5.2.6 Implementing Registers
6.0 PROGRAMMING