Commercial In Confidence
26
The ART product can be operated in single frequency simplex, two frequency simplex (semi-
duplex) or full duplex, provided the channels are within the bandwidth of the product.
This is particularly useful when using the unit in the UK, as MPT1411 (two frequency
simplex/duplex) and MPT1329 (single frequency simplex) channels can be programmed and
used together.
3.2.2
SINGLE OR DUAL ANTENNA OPERATION
The ART product is normally ordered for Simplex single antenna or Simplex/Duplex
dual antenna operation However with the correct parts the conversion from one to the other
takes only a few minutes.
3.2.3
COAX CONFIGURATIONS
For two antenna operation individual coaxes from the receiver and the transmitter module
connect to separate BNC connectors on the chassis. In single antenna operation the
receiver ‘s internal antenna connector is connected to the RX port on the transmitter module
and a blanking cap is fitted where the RX BNC would normally be fitted. The RX port on the
transmitter is a pin diode switched output with isolation to stop excessive RF power being
fed into the receiver during transmit. Fitting of link JP1 sets a hard wired control line that
switches off the receiver’s front end during transmission for additional protection.
Содержание ART400
Страница 15: ...Commercial In Confidence 15 SPECIFICATIONS 2...
Страница 24: ...Commercial In Confidence 24 OPERATION INTERFACE3 3 1 EXPLODED VIEW...
Страница 41: ...Commercial In Confidence 41 INSTALLATION4...
Страница 66: ...Commercial In Confidence 66 SOFTWARE ANCILLARY ITEMS 7 7 1 PC SOFTWARE...