RF Central microLite Transmitter, Руководство пользователя

Страница: 32 / 38

microLite Transmitter User Manual
Revision 1.2
32
Figure 4-3: Unit Interface - Sports and Entertainment
4.4.1 Unit Interface Buttons
4.4.1.1 SET
The Set button Advances the unit through the presets. The 1-12 LED’s
indicate in GREEN, which preset is currently active.
4.4.1.2 TX/STBY
The TX/STBY button toggles between Transmit and Standby modes. TX
LED= Green for TX mode. Yellow LED for standby mode.
4.4.1.3 Hi /LOW
The HI/LOW button toggles between High and Low Power modes. The Green
LED for High power Yellow LED for Low power
4.4.1.4 Bars or Fan
The MicroLite HD comes standard with either an external Bars or Fan control
button depending what version you order.
•
Bars - This is a push button switch pressing once changes to bars mode.
Then push it once again to go back to video mode.
•
Fan – This push button switches the fan on and off.
4.4.2 User Interface Alarm Indicators
4.4.2.1 Unit Fail or System Fail
The LED will display Blinking YELLOW, which indicates an RF synthesizer
lock failure. The unit will not transmit. Return unit to IMT for service.
4.4.2.2 Low Battery
The LED will display Blinking YELLOW which indicates battery voltage <
9V.
4.4.2.3 Over Temp/Fan Mode
•
Over Temp - The LED will display Blinking YELLOW that indicates
internal temperature is too high. Check Fan operation or move to a lower
ambient temperature.
•
Fan Mode – The light is green when unit is cool enough to turn the fan off.
Yellow indicates fan is off. Blinking yellow indicates fan is off but will
automatically turn on in a minute.