RF Central microLite Transmitter, Руководство пользователя

Страница: 17 / 38

microLite Transmitter User Manual
Revision 1.2
17
2.1.8 Remote Control and Firmware
2.1.8.1 Remote Control via Serial Interface
An RS-232 command set is implemented to allow remote control of all
configuration options, as well as monitoring of internal status and settings.
Commands and responses are sent via the RS-232 serial interface located on
the Power/Control connector.
The IMT NanoController GUI is available for controlling the unit via the RS-
232 serial interface. A Windows compatible computer running Windows XP or
Vista with 500 MB of memory and 1 GHz Pentium or above can is needed.
Refer to Chapter 4, “Operation” and the NanoController Manual (M27-0001-
00A) for more information.
2.1.8.2 Firmware updates
The unit firmware is updated via the USB interface on the Power/Control
connector, using the
IMT NanoTx Programmer software. A programming
cable (IMT part number 922-B963-01A-R) is required. Contact IMT Tech
Support for additional details.
2.2 MicroLite Physical Features and Interfaces
Figure 2-2:
microLite
Transmitter User Interface
Figure 2-3:
MLT
Connectors